FS TAP Series User Manual

TAP Series Switch Command Line Reference
86
Switch#
Related Commands
ip ssh server enable
8.3 ip ssh server enable
To enable SSH service, use ip ssh server enable command in global configuration mode.
Command Syntax
ip ssh server enable
Command Mode
Global Configuration
Default
SSH service is enabled.
Usage
To enable SSH service, use ip ssh server enable command in global configuration mode.
Examples
The following example enables the SSH service on your switch:
Switch(config)# ip ssh server enable
Related Commands
ip ssh server disable
8.4 ip ssh server disable
To disable SSH service, use ip ssh server disable command.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English