FS TAP Series User Manual

TAP Series Switch Command Line Reference
12
Admin input flow-control is off, output flow-control is off
Oper input flow-control is off, output flow-control is off
The Maximum Frame Size is 1632 bytes
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
Received 0 unicast, 0 broadcast, 0 multicast
0 runts, 0 giants, 0 input errors, 0 CRC
0 frame, 0 overrun, 0 pause input
0 packets output, 0 bytes
Transmitted 0 unicast, 0 broadcast, 0 multicast
0 underruns, 0 output errors, 0 pause output
Related Commands
show interface status
1.3 show interface summary
Use this command to display the statistics on all interfaces or one interface.
Command Syntax
show interface summary (IF_NAME |)
IF_NAME
Specify the interface name to show.
This command supports physical or link
aggregation interfaces.
Command Mode
Privileged EXEC
Default
none
Usage
Use this command to display the statistics on all interfaces or one interface.
If the parameter “IF_NAME” is not specified, the command indicates that all interfaces on
this device should be displayed; otherwise only the specified interface should be displayed.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English