FS TAP Series

TAP Series Switch Command Line Reference
325
Related Commands
clock set datetime
clock set timezone
19.5 show transceiver
Use this command to show the transceiver information.
Command Syntax
show transceiver (IF_NAME_E|) (detail|)
IF_NAME_E
Ethernet interface name
detail
Show detailed information
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show the interface transceiver information, or the transceiver detail
information.
Examples
This example shows how to display transceiver information.
Switch# show transceiver detail
Port eth-0-17 transceiver info:
Transceiver Type: 1000BASE-T_SFP
Transceiver Vendor Name : INNOLIGHT
Transceiver PN : TC-SORJZ-N00
Transceiver S/N : IN0912SZ01025C
Transceiver Output Wavelength: N/A
Supported Link Type and Length: