FS TAP Series

TAP Series Switch Command Line Reference
301
IP_ADDR
Server IP
STRING
Image file name
Command Mode
Privileged EXEC
Default
None
Usage
Management IP address in startup-config file will be used as source address when system
boot via TFTP.
This command will take effect after reboot.
Examples
The following example is sample dialog from the boot system via tftp command.
Switch# boot system tftp: mgmt-if 10.10.38.160 SecPathTAP2000A-IMW110-E6601.BIN.01
Waiting . success
Related Commands
reboot
18.11 show boot
To display the current image and the image the next startup will load, use the show boot
command in Privileged EXEC mode.
Command Syntax
show boot (image|)
image
Show the detailed information about the boot
image.