TAP Series Switch Command Line Reference
Command Syntax
format udisk:
Command Mode
Global Configuration
Default
None.
Usage
Format the USB mass storage device (MSDOS file system)
Examples
The following shows an example to format USB mass storage device:
Switch(config)# format udisk:
WARNING: All data on udisk: will be lost!!!
And format operation may take a while. Are you sure to process with format? [yes/no]: yes
Related Commands
umount udisk:
To uninstall the USB mass storage device before plug out it from the switch.
Command Syntax
umount udisk:
Command Mode
Global Configuration
To Next Page
Loading...
