FS TAP Series

TAP Series Switch Command Line Reference
16
Examples
The following example shows how to display the description information of all interfaces:
Switch# show interface description
Name Status Description
----------+-----------+---------------------------------------------------------
eth-0-1 down TenGigabitEthernet
eth-0-2 down
eth-0-3 down
eth-0-4 down
eth-0-5 down
eth-0-6 down
eth-0-7 down
eth-0-8 down
eth-0-9 down
eth-0-10 down
eth-0-11 down
eth-0-12 down
eth-0-13 down
eth-0-14 down
eth-0-15 down
eth-0-16 down
eth-0-17 down
eth-0-18 down
eth-0-19 down
eth-0-20 down
eth-0-21 down
eth-0-22 down
eth-0-23 down
eth-0-24 down
eth-0-25 down
eth-0-26 down
eth-0-27 down
eth-0-28 down
eth-0-29 down
eth-0-30 down
eth-0-31 down
eth-0-32 down
FGE0/33 down
FGE0/34 down
agg5 down LinkAgg5
Related Commands
Show interface
1.6 clear counters
Use this command to clear the counters on the interfaces.