FS TAP Series

TAP Series Switch Command Line Reference
292
Related Commands
disable
enable password
18.3 logout
To logout of the current CLI session, enter the logout command in EXEC mode.
Command Syntax
logout
Command Mode
Privileged EXEC
Default
None
Usage
To logout of the current CLI session, enter the logout command in EXEC mode.
Examples
In the following example, the user logout of the current CLI session using the logout
command.
Switch# logout
Connection closed by foreign host.
Related Commands
None
18.4 reboot
To reload the operating system, use the reboot command in Privileged EXEC mode.