FS TAP Series

TAP Series Switch Command Line Reference
120
12 SYSLOG Commands
12.1 show logging
Use this command to show configuration of logging.
Command Syntax
show logging
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show configuration of logging.
Examples
The following is sample output from the show logging command:
Switch# show logging
Current logging configuration:
============================================================
logging buffer 500
logging timestamp bsd
logging file enable
logging level file warning
logging level module debug
logging server disable
logging server severity warning
logging server facility local4
logging merge disable
logging merge fifo-size 1024