FS TAP Series User Manual

TAP Series Switch Command Line Reference
92
The following examples restore SSH authentication type to default value:
Switch(config)# no ip ssh server authentication-type
Related Commands
show ip ssh server status
8.9 ip ssh server rekey-interval
To configure Secure Shell (SSH) rekey interval on your switch, use the ip ssh server rekey-
interval command in global configuration mode.
Use the no form of this command to restore the default value of Secure Shell (SSH) rekey
interval on your switch.
Command Syntax
ip ssh server rekey-interval SSHREKEYINTVL
no ip ssh server rekey-interval
SSHREKEYINTVL
Rekey interval(minute(s), default 60)
Command Mode
Global Configuration
Default
The default interval is 60 minutes.
Usage
To configure Secure Shell (SSH) rekey interval on your switch, use the ip ssh server rekey-
interval command in global configuration mode.
Use the no form of this command to restore the default value of Secure Shell (SSH) rekey
interval on your switch.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English