FS TAP Series

TAP Series Switch Command Line Reference
290
18 SYSTEM CONFIGURATION Commands
18.1 disable
To exit Privileged EXEC mode and return to user EXEC mode, enter the disable command in
EXEC mode.
Command Syntax
disable
Command Mode
Privileged EXEC
Default
None
Usage
To exit Privileged EXEC mode and return to user EXEC mode, enter the disable command in
EXEC mode.
The prompt for Privileged EXEC mode is
“
#
”
, for EXEC mode is
“
>
”
.
Examples
In the following example, the user enters Privileged EXEC mode using the enable command,
then exits back to user EXEC mode using the disable command:
Switch# disable
Switch>