FS TAP Series User Manual

TAP Series Switch Command Line Reference
95
9 LACP Commands
9.1 show channel-group
Use show channel-group summary command to display a summary of all of the channel
groups, or a specified channel group. Use show channel-group detail command to display
detailed information of all of the channel groups, or a specified channel group. Use show
channel-group port command to display port information of all of the channel groups, or a
specified channel group.
Command Syntax
show channel-group (AGG_GID|) (summary| detail| port)
AGG_GID
Channel group id. Valid minimum ID is 1. Valid
maximum id is defined as blow:
for CTC5160 (GreatBelt) based system: 31.
for CTC8096(GoldenGate) based system: 55
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the channel group information.
If the AGG_GID is not specified, this command indicates that all channel groups on this
device should be shown.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English