FS TAP Series User Manual

TAP Series Switch Command Line Reference
177
Command Syntax
line vty VTYID (VTYID|)
VTYID
First Line number
VTYID
Last Line number
Command Mode
Global Configuration
Default
None
Usage
Use line vty command to set virtual terminal line configuration.
Examples
The following is an example of configure to virtual terminal line 4 to 7:
Switch(config)# line vty 4 7
Switch(config-line)#
Related Commands
show vty
14.20 line vty maximum
Use line vty maximum command to set maximum vty users.
Use the no form of this command to set maximum vty users to it default value.
Command Syntax
line vty maximum VTYMAX
no line vty maximum

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English