FS TAP Series

TAP Series Switch Command Line Reference
126
Switch# clear logging buffer
Related Commands
show logging buffer
12.7 logging sync
To sync log to logging buffer, use the logging sync command in privileged EXEC mode.
Command Syntax
logging sync
Command Mode
Privileged EXEC
Default
None
Usage
When enabled log merge, system will merge all the same logs into one during a specified
time range. During this time log will not send to logging buffer. If user wants to sync log to
logging buffer, use this command.
Examples
The following shows how to enable logging sync function:
Switch# logging sync
Related Commands
show logging buffer