FS TAP Series

TAP Series Switch Command Line Reference
288
Examples
The following example set telnet service enable for the switch.
Switch# configure terminal
Switch(config)# service telnet enable
The following example set telnet service disable for the switch.
Switch# configure terminal
Switch(config)# no service telnet enable
Connection closed by foreign host.
Related Commands
telnet
17.8 service http
Use this command to set service http enable or disable or restart.
Command Syntax
service http (enable | disable | restart)
enable
Enable the http service
disable
Disable the http service
restart
Restart the http service
Command Mode
Global Configuration
Default
Enabled
Usage
Uses this command to enable or disable or restart http service.