FS TAP Series

TAP Series Switch Command Line Reference
61
4.5 remark
Use this command to add remarks for the flow or ip access-list.
Command Syntax
remark NAME_STRING
NAME_STRING
Remark string for the IP ACL which should
begin with a-z/A-Z/0-9, valid characters are
0-9A-Za-z.-, maximum length is 100
characters.
Command Mode
ACL Configuration
Default
Default is no remarks of flow or ip access-list.
Usage
The remarks are up to 100 characters. The exceed parts will not be stored and will be
truncated.
Examples
This example shows how to add a remark to describe the IP ACL:
Switch(config-acl-acl1)# remark acl1ipdeny
This example shows how to remove the remark:
Switch(config-acl-acl1)# no remark
Related Commands
show ip access-list