FS TAP Series

TAP Series Switch Command Line Reference
161
14.2 show users
Use this command to display information about terminal lines.
Command Syntax
show users
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display information about terminal lines.
Examples
The following is sample output from the show users command:
Switch# show users
Line Host(s) Idle Location User
---------------+----------+----------+---------------+----------
130 vty 0 idle 2d20h16m Local
131 vty 1 idle 20:42:32 10.10.25.25
*132 vty 2 idle 00:00:00 10.10.25.25
Related Commands
show usernames
14.3 show web users
Use this command to display information of the web users。
Command Syntax
show web users