TAP Series Switch Command Line Reference
Usage
Use this command to show device indicate led information.
Examples
The following example shows the device indicates led information:
Switch# show device id-led
Indicate led is forced on
Related Commands
set device id-led
19.11 show schedule reboot
Use this command to show schedule reboot information.
Command Syntax
show schedule reboot
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show schedule reboot information.
Examples
The following example shows schedule reboot information:
Switch# show schedule reboot
Current time is : 2017-09-26 22:14:49
Will reboot at : 2017-09-26 23:48:44