FS TAP Series

TAP Series Switch Command Line Reference
124
2 critical critical conditions
3 error error conditions
4 warning warning conditions
5 notice normal but significant condition
6 information informational
7 debug debug-level messages
Related Commands
logging level file
12.5 show logging facilities
Use this command to show the facility information of logging.
Command Syntax
show logging facilities
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show the facility information of logging.
Examples
The following is sample output from the show logging facilities command:
Switch# show logging facilities
Logging facility information:
Facility Name Note
============================================================
0 kern kernel messages
1 user random user-level messages
2 mail mail system
3 daemon system daemons
4 auth security/authorization messages