FS TAP Series

TAP Series Switch Command Line Reference
173
Usage
This command is used to show TACACS+ servers configurations.
Examples
The following is sample output from the show tacacs command:
Switch# show tacacs
================================================================
Host Port Timeout Retries Dead Secret
================================================================
2.1.1.1 49 5 3 0 mykey
Related Commands
tacacs-server host
14.15 show aaa status
Use this command to show authentication, authorization, accounting (AAA) status.
Command Syntax
show aaa status
Command Mode
Privileged EXEC
Default
None
Usage
This command is used to show authentication, authorization, accounting (AAA) status.
Examples
The following example shows how to show authentication, authorization, accounting status: