TAP Series Switch Command Line Reference
packets not sent :0
interrupts handled :19081
received by int :333
Related Commands
ntp server
clear ntp statistics
10.4 show ntp associations
This command displays the status of Network Time Protocol (NTP) associations.
Command Syntax
show ntp associations
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the status of Network Time Protocol (NTP) associations.
Examples
The following example shows the status of NTP associations:
Switch# show ntp associations
* synced, + symmetric active mode, - symmetric passive mode,
= client mode, ^ broadcast mode, ~ broadcast client mode
remote local st poll reach delay offset disp
=======================================================================
=172.16.22.44 169.254.2.1 16 1024 0 0.00000 0.000000 3.99217
=10.1.1.23 169.254.2.1 16 1024 0 0.00000 0.000000 3.99217
=192.16.22.44 169.254.2.1 16 1024 0 0.00000 0.000000 3.99217
*10.10.25.8 169.254.2.1 4 128 377 0.00031 0.067999 0.09810
To Next Page
Loading...
Need help?
General
