FS TAP Series

TAP Series Switch Command Line Reference
200
rsa key
14.43 username privilege
Use this command to set user privilege level.
Command Syntax
username NAME_STRING privilege PRIVILEGE (password (8 |) PASSWORD | secret
PASSWORD |)
NAME_STRING
User name
PRIVILEGE
Set user privilege level
8
Specifies a hidden password will follow
PASSWORD
User password string
secret PASSWORD
User secret string
Command Mode
Global Configuration
Default
None
Usage
Use this command to set user privilege level.
Examples
This is a sample output from this command displaying how to add a user named testName
and with the password of 123456.
Switch(config)# username testName password 123456
Related Commands
show usernames