FS TAP Series - enable password

TAP Series Switch Command Line Reference
202
OLD_NAME
Old user name
NEW_NAME
New user name
Command Mode
Global Configuration
Default
None
Usage
Use re-username command to modify local user account on the switch.
Examples
The following example shows how to change user account's name:
Switch(config)# re-username jack mike
Related Commands
show usernames
14.46 enable password
Use this command to set the password which is needed when user enter Privileged EXEC
mode.
Command Syntax
enable password ( 8 |) PASSWORD
no enable password
8
Specifies a hidden password will follow
PASSWORD
Enable password string