FS TAP Series

TAP Series Switch Command Line Reference
321
19 DEVICE Commands
19.1 show version
To display the version information of the hardware and firmware, use the show version
command in EXEC mode.
Command Syntax
show version
Command Mode
Privileged EXEC
Default
None
Usage
This command can display the version information of the hardware and firmware.
Examples
This example shows how to display version information of the hardware and firmware.
Switch# show version
FS i-Ware Software, Version 1.10, ESS 6601 01
Copyright(C) 2004-2017 New FS Technologies Co., Ltd. All rights Reserved
FS SecPath FW uptime is 0 weeks, 1 day, 1 hours, 16 minutes
Boot image: flash:/boot/SecPathTAP2000S-IMW110-E6601.BIN
Boot image version: 1.10, ESS 6601 01
Next running image : flash:/boot/SecPathTAP2000S-IMW110-E6601.BIN
SLOT 1
Hardware Type : CTC8096(GoldenGate) based switch