FS TAP Series

TAP Series Switch Command Line Reference
189
Related Commands
radius-server host
14.32 show radius-server
Use this command to display radius server states of each IEEE 802.1 x sessions.
Command Syntax
show radius-server
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the current radius-server and dead radius-servers of each IEEE
802.1x sessions.
Examples
This example shows how to show radius-server:
Switch# show radius-server
=====================================
radius servers in dead list:
server address : 10.0.0.1:1812
dead timer : 4
=====================================
Related Commands
radius-server host