FS TAP Series

TAP Series Switch Command Line Reference
142
Default
None
Usage
An SNMP engine is a copy of SNMP that can reside on a local or remote device.
Examples
The following example shows how to display the information of engineID:
Switch# show snmp-server engineID
Engine ID : 00000009020000000c025808
Related Commands
snmp-server engineID
13.5 show snmp-server sys-info
To display the system information of SNMP, use the show snmp-server sys-info command in
privileged EXEC mode.
Command Syntax
show snmp-server sys-info
Command Mode
Privileged EXEC
Default
None
Usage
The system contact can be set by using the snmp-server system-contact command. The
system location can be set by using the snmp-server system-location command.