FS TAP Series

TAP Series Switch Command Line Reference
307
Command Mode
Privileged EXEC
Default
0 (no pausing)
Usage
None
Examples
The following is sample to set terminal length lines:
Switch# terminal length 100
The following is sample to unset terminal length lines:
Switch# terminal no length
Related Commands
None
18.16 terminal monitor
To copy debug output to the current terminal line, use the terminal monitor command in
Privileged EXEC mode.
To close the debug output to the current terminal line, use the no form of this command.
Command Syntax
terminal monitor
terminal no monitor
Command Mode
Privileged EXEC