FS TAP Series - Page 308

TAP Series Switch Command Line Reference
308
Default
Debug output to the current terminal line is closed
Usage
To copy debug output to the current terminal line, use the terminal monitor command in
Privileged EXEC mode.
To close the debug output to the current terminal line, use the no form of this command.
Examples
The following is sample output from the terminal monitor command:
Switch# terminal monitor
The following is sample close the debug output to the current terminal line:
Switch# terminal no monitor
Related Commands
debug aaa
debug sflow
18.17 cd
Change the current directory to dir, use the cd command in EXEC mode.
Command Syntax
cd (STRING|)
STRING
Directory name
Command Mode
Privileged EXEC