FS TAP Series

TAP Series Switch Command Line Reference
141
Command Mode
Privileged EXEC
Default
None
Usage
This command is used to display the community information configured by command snmp-
server community.
Examples
The following example shows how to display the information of snmp-server community:
Switch # show snmp-server community
Community-Access Community-String Security-name
===========================================================
read-write sysname comm1
Related Commands
snmp-server community
13.4 show snmp-server engineID
To display the identification of the local Simple Network Management Protocol (SNMP)
engine and all remote engines that have been configured on the router, use the show snmp-
server engineID command in EXEC mode.
Command Syntax
show snmp-server engineID
Command Mode
Privileged EXEC