FS TAP Series

TAP Series Switch Command Line Reference
217
Switch# configure terminal
Switch(config)# line console 0
Switch(config-line)# no privilege level
Related Commands
show console
14.59 line-password
Use this command to set console line-password specifies a hidden password will follow or
user password string.
Use the no form of this command to unset console line-password.
Command Syntax
line-password ( 8 |) NAME_STRING
no line-password
8
Specifies a hidden password will follow
NAME_STRING
User password string
Command Mode
Line-CON
Default
No console line-password.
Usage
Use this command to set console line-password specifies a hidden password will follow or
user password string.
Use the no form of this command to unset console line-password.