FS TAP Series

TAP Series Switch Command Line Reference
330
Related Commands
clear reboot-info
19.8 clear reboot-info
Use this command to clear reboot information.
Command Syntax
clear reboot-info
Command Mode
Privileged EXEC
Default
None
Usage
The clear reboot-info command can clear reboot information.
Examples
The following example shows how to clear reboot information:
Switch# clear reboot-info
Related Commands
show reboot-info
19.9 set device id-led
Use this command to set the device indicate led force on or force off.
Command Syntax
set device id-led ( on| off)