FS TAP Series User Manual

TAP Series Switch Command Line Reference
97
Flags: s - suspend T - standby
w - wait B - in Bundle
R - Layer3 S - Layer2
D - down/admin down U - in use
Mode: SLB - static load balance
DLB - dynamic load balance
RR - round robin load balance
Aggregator Mode Protocol Ports
----------+----+--------+----------------------------------------------------
agg10(SD) SLB Static eth-0-3(D) eth-0-4(D)
Related Commands
static-channel-group
9.2 show channel-group interface
Use this command to display interface link stats of the channel groups.
Command Syntax
show channel-group interface IF_NAME
IF_NAME
Specify the interface name to show.
This command supports physical interfaces.
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display interface link stats of the channel groups.
Examples
This example shows how to display interface link stats of the channel groups:

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English