FS TAP Series - show running-config

TAP Series Switch Command Line Reference
239
Command Syntax
show history
Command Mode
Privileged EXEC
Default
none
Usage
Use this command to display the history command lines.
Examples
This example shows how to display history commands information of device.
Switch# show history
1 show version
2 debug sflow all
3 no debug sflow all
4 show history 1 show history
Related Commands
None
16.4 show running-config
To display the current operating configuration, use the show running-config command in
EXEC mode.
Command Syntax
show running-config
Command Mode
Privileged EXEC