TAP Series Switch Command Line Reference
1-3 OK 60% AUTO
Power status:
Index Status Power Type Alert
----------+------------+------------+------------+------------
1 PRESENT OK AC NO
2 ABSENT - - -
Sensor status (Degree Centigrade):
Index Temperature Lower_alarm Upper_alarm Critical Position
----------+------------+------------+------------+------------+------------
1 56 5 65 80 AROUND_CPU
Related Commands
temperature
Use this command to show the clock information.
Command Syntax
show clock
Command Mode
Privileged EXEC
Default
None
Usage
The show clock command can get the clock information.
Examples
This example shows how to display clock information.
Switch# show clock
05:29:55 Beijing Wed Sep 27 2017
Time Zone(Beijing) : UTC+08:00:00
To Next Page
Loading...
