FS TAP Series User Manual

TAP Series Switch Command Line Reference
145
13.8 show snmp-server view
To display the family name, storage types, and status of a Simple Network Management
Protocol (SNMP) configuration and associated MIB, use the show snmp-server view
command in privileged EXEC mode.
Command Syntax
show snmp-server view (USERNAME|)
USERNAME
Specify a view name that want to show,
WORD
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the SNMP view configuration.
Examples
The following example shows how to display the information of snmp-server view:
Switch# show snmp-server view
View-name View-type Subtree
===========================================================
a excluded .1
a2 included .1.2
abc excluded .1.3.6.2
_all_ included .0
_all_ included .1
_all_ included .2
_none_ excluded .0
_none_ excluded .1
_none_ excluded .2

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English