FS TAP Series - ip ssh server host-key

TAP Series Switch Command Line Reference
93
Examples
The following examples configure SSH rekey interval on your switch:
Switch(config)# ip ssh server rekey-interval 30
The following examples restore SSH rekey interval to default value:
Switch(config)# no ip ssh server rekey-interval
Related Commands
show ip ssh server status
8.10 ip ssh server host-key
To configure Secure Shell (SSH) host-key on your switch, use the ip ssh server host-key rsa key
command in global configuration mode.
Use the no form of this command to restore the default value of Secure Shell (SSH) host-key
on your switch.
Command Syntax
ip ssh server host-key rsa key RSAKEYNAME
no ip ssh server host-key
RSAKEYNAME
Key Name
Command Mode
Global Configuration
Default
There is no host-key by default.
Usage
To configure Secure Shell (SSH) host-key on your switch, use the ip ssh server host-key rsa key
command in global configuration mode.