FS TAP Series

TAP Series Switch Command Line Reference
106
10 NTP Commands
10.1 show ntp
This command displays the NTP configurations.
Command Syntax
show ntp
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the NTP configurations.
Examples
The following example shows the configuration of NTP:
Switch# show ntp
Unicast peer or server:
1.1.1.1 server
10.1.1.23 key 43 version 2 prefer server
10.10.25.8 server
172.16.22.44 version 2 server
192.16.22.44 version 2 server
Authentication: enabled
Local reference clock: