FS TAP Series

TAP Series Switch Command Line Reference
98
Switch# show channel-group interface eth-0-3
Port : eth-0-3
----------------------------
State : Down Out-Bundle
Channel group : 10
Protocol : static
Port index : 3
Related Commands
static-channel-group
9.3 show port-channel load-balance
Use this command to show the load balance type for the Link Aggregation Control Protocol
(LACP).
Command Syntax
show port-channel load-balance
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show the load balance type for the Link Aggregation Control Protocol
(LACP)
Examples
This example shows the load balance type for the Link Aggregation:
Switch# show port-channel load-balance
Port-channel load-balance hash fields:
--------------------------------------
src-ip
dst-ip