TAP Series Switch Command Line Reference
Examples
The following is sample output from the show logging buffer statistics command:
Switch# show logging buffer statistics
Logging buffer statistics:
------------------------------------------------------------
Total processed 314 entries
Total dropped 0 entries
Current have 50 entries
Related Commands
clear logging buffer
Use this command to show the severity level information of logging.
Command Syntax
show logging levels
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show the severity level information of logging.
Examples
The following is sample output from the show logging levels command
Switch# show logging levels
Severity Name Note
============================================================
0 emergency system is unusable
1 alert action must be taken immediately
To Next Page
Loading...
