FS TAP Series - re-activate tacacs-server host

TAP Series Switch Command Line Reference
195
Related Commands
show radius-server
14.38 re-activate tacacs-server host
Use this command to re-activate the specified tacacs servers.
Command Syntax
re-activate tacacs-server (all | host IP_ADDR (auth-port AUTHDPORT |) |)
all
Re-active all tacacs-servers
IP_ADDR
Set TACACS server IP address
AUTHDPORT
TACACS server port number (default 49)
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to re-activate the tacacs server. It's unnecessary for users to wait for the
tacacs-server dead time with this command.
Examples
This example shows how to re-activate tacacs-server:
Switch# re-activate tacacs-server host 10.0.0.1 auth-port 49
Related Commands
tacacs-server host