TAP Series Switch Command Line Reference
Command Syntax
reboot
Command Mode
Privileged EXEC
Default
None
Usage
The reboot command halts the system. Use the reboot command after configuration
information is entered into a file and saved to the startup configuration.
Examples
The following example is sample dialog from the reboot command:
Switch# reboot
Building configuration...
Reboot system? [confirm]y
Waiting ...
% Connection is closed by administrator!
Related Commands
Write
Use this command to show file system information.
Command Syntax
show file system
Command Mode
Privileged EXEC
To Next Page
Loading...
Need help?
General
