FS TAP Series

TAP Series Switch Command Line Reference
108
system flags : auth monitor ntp kernel stats
jitter : 0.000000 s
stability : 18.062 ppm
broadcastdelay : 3.000000 s
authdelay : 0.000000 s
Related Commands
ntp minimum-distance
10.3 show ntp statistics
This command displays the statistics of the Network Time Protocol (NTP).
Command Syntax
show ntp statistics
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to display the statistics of the Network Time Protocol (NTP).
Examples
The following is sample output from the show ntp statistics command:
Switch# show ntp statistics
time since reset :18748
receive buffers :10
free receive buffers :9
used receive buffers :0
low water refills :1
dropped packets :0
ignored packets :0
received packets :333
packets sent :545