FS TAP Series

TAP Series Switch Command Line Reference
339
19.18 schedule reboot at
Use this command to set schedule reboot at a time.
Use the no form of this command to cancel the schedule.
Command Syntax
schedule reboot at HOUR_MIN (YEAR_MON_DAY|)
no schedule reboot
HOUR_MIN
Specify the hour and minute
YEAR_MON_DAY
Specify the date for current year, year range is
[2000, 2037]
Command Mode
Global Configuration
Default
None
Usage
The reboot time could select time with format HH:MM, and optional date with format
YYYY/MM/DD or MM/DD/YYYY or MM/DD.
Examples
The following example shows how to set schedule reboot at a time:
Switch(config)# schedule reboot at 10:20 2016/10/2
Related Commands
show schedule reboot
19.19 schedule reboot delay
Use this command to set schedule reboot after a time.