FS TAP Series User Manual

TAP Series Switch Command Line Reference
294
Default
None
Usage
Use this command to show file system information.
Examples
The following example is to show file system information:
Switch# show file system
Type Size Used Free Use%
======================================================================
flash:/ 887M 56M 827M 7%
flash:/boot 776M 360M 412M 47%
udisk: 0B 0B 0B 100%
Related Commands
None
18.6 show management ip address
Use this command to show management interface ip address.
Command Syntax
show management ip address
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to show management interface ip address.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English