FS TAP Series User Manual

TAP Series Switch Command Line Reference
299
no line-password
no login
Related Commands
None
18.8 write
Use this command to write startup configuration.
Command Syntax
write
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to write startup configuration.
Examples
The following example is to write startup configuration:
Switch# write
[OK]
Related Commands
show startup-config
18.9 boot system flash
To specify the system image that the switch loads at startup in flash, use the following boot
system commands in Privileged EXEC mode.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English