FS TAP Series

TAP Series Switch Command Line Reference
87
Command Syntax
ip ssh server disable
Command Mode
Global Configuration
Default
SSH service is enabled.
Usage
None
Examples
The following example disable the SSH service on your switch:
Switch(config)# ip ssh server disable
Related Commands
ip ssh server enable
8.5 ip ssh server version
To configure Secure Shell (SSH) version on your switch, use the ip ssh server version
command in global configuration mode.
Use the no form of this command to restore the default value.
Command Syntax
ip ssh server version ( v1 | v2 | all )
no ip ssh server version
v1
Support SSH version 1