FS TAP Series User Manual

TAP Series Switch Command Line Reference
135
3|daemon
System daemon
11|ftp
FTP system
0|kern
Kernel
local0–7
Reserved for locally defined messages
6|lpr
Line printer system
2|mail
Mail system
7|news
USENET news
5|syslog
System log
1|user
User
8|uucp
UNIX-to-UNIX
Command Mode
Global Configuration
Default
Default is local4.
Usage
To configure the syslog facility in which error messages are sent, use the logging server
facility command in Global Configuration mode.
Use the no form of this command to restore the default value.
Examples
The following shows how to set logging server facility command:
Switch(config)# logging server facility local3
The following shows how to set logging server facility to default command:
Switch(config)# no logging server facility

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English