FS TAP Series User Manual

TAP Series Switch Command Line Reference
206
Use the no form of this command to disable the authentication, authorization, accounting
(AAA) access control model.
Command Syntax
aaa new-model
no aaa new-model
Command Mode
Global Configuration
Default
AAA access model is disabled
Usage
Use this command to enable the authentication, authorization, accounting (AAA) access
control model.
Use the no form of this command to disable the authentication, authorization, accounting
(AAA) access control model.
Examples
The following example shows how to enable AAA access control model:
Switch(config)# aaa new-model
The following example shows how to disable AAA access control model:
Switch(config)# no aaa new-model
Related Commands
show aaa status

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English