5.5 Copy Mode Settings
144
5
System Administration Mode Settings
7. 2 Sided
Set the default of 2 Sided in the Added Features screen. This item can be set only on machines
installed with the 2 Side Copy feature. Enter the setting values using the numeric keypad referring to
the table below.
(Default is 0 as 1 → 2 Sided.)
For details about 2 Sided, see “3.3 Making One sided/Two sided Copies - 2 Sided” (P. 299) in “Part 2 Copier”.
8. Output
Set the default of Output/Stapling in the Added Features screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Auto.)
128 MB Memory kit is not installed, Uncollated operation is performed even if Collated is set.
For details about Output, see “3.6 Sorting Copies Before Output - Output” (P. 324) in “Part 2 Copier”.
Setting Value Description
01 → 1 Sided
11 → 2 Sided
22 → 1 Sided
32 → 2 Sided
Setting Value Description
0Auto
1Collated
2 Uncollated
To Next Page
Loading...
Need help?
General
