6.6 Printing Reports/Lists
221
6
Managing Totals and Outputting Reports
Copy Mode Settings
Communications Settings
Whether or not the ports are started up or stopped is printed. The following items
are printed if a port is started up:
Basic Copying screen The setting values for tray buttons in paper supply and ratio
buttons in Reduce/Enlarge are printed.
Copy features defaults Features set the Output Color, single color setting, dual color
setting, paper supply, reduce/enlarge, margin shift, edge
erase, rotate 90°, rotate direction, color balance, tone, satu-
ration, sharpness, contrast, original type, copy density, docu-
ment orientation, output, output destination, and 2 sided are
printed.
Copy control The settings for the tray at auto job release and processing
of memory overflows are printed.
Document size buttons The setting values of document size buttons No. 1 to 11 are
printed.
R/E presets buttons The setting values of R/E presets buttons No. 1 to 7 are
printed.
Custom colors Custom colors No. 1 to 6 are printed.
Ethernet setting The connection type and MAC address are printed.
TCP/IP The IP address acquisition method, IP address, subnet
mask, gateway address, and status information are printed.
WINS The address acquisition method from a DHCP server, pri-
mary WINS server, and primary WINS server settings are
printed.
DNS The address acquisition method from DNS server, DNS
server address, and domain name are printed.
SNMP The port states and transport protocol are printed.
CentreWare
Internet Services
The port states are printed.
Parallel The port states, print mode, PJL, Adobe communications
protocol, auto eject time, bi-directional communication, and
input prime settings are printed.
NetWare The port states, print mode, PJL, transport protocol, TBCP
filter, operation mode, unit name, network address, tree
name (only in directory mode), context name (only in direc-
tory mode), file server name (only in boundary mode), com-
munications language, key search interval, number of
searches, and status information are printed.
LPD The port states, print mode, PJL, TBCP filter, accepted IP
address restriction, connection time-out, and port No. are
printed.
To Next Page
Loading...
Need help?
General
