Chapter 2 Troubleshooting
2.2 Status Code List
2-33
061-370
Laser Error
061-370
Code:xxxxxxxx
Restart Printer
<IOT ROS Failure>
The operation error of ROS (rotational error etc.) is
detected.
FIP1.14
062-311
Scanner Error
062-311
Restart Printer
<Scanner Error>
IIT failure initialization error.
FIP1.15
062-320
Scanner Error
062-320
Restart Printer
<Scanner Error>
Scanning error.
FIP1.15
062-321
Scanner Error
062-321
Restart Printer
<Scanner Error>
Unexecutable error. (carriage is at the locked posi-
tion, etc.)
FIP1.15
062-322
Scanner Error
062-322
Restart Printer
<Scanner Error>
Parameter error.
FIP1.15
062-360
Scanner Sensor Error
062-360
Restart Printer
<HP Sensor Error>
Carriage home position error.
FIP1.15
062-371
Scanner Lamp Error
062-371
Restart Printer
<Scanner Lamp Error>
IIT failure Lamp error.
FIP1.15
062-393
Scanner Error
062-393
Restart Printer
<CCD ASIC Error>
CCD ASIC communication error.
FIP1.15
062-790
Copier Error
Last Sheet not Copied
Press OK Button
<Copy Limit>
Copy limit.
Replace the
PWBA ESS.
(REP18.1)
071-100 -
<IOT Tray1 Misfeed Jam>
After the Tray 1 Feed Clutch turned ON, the Regi.
Sensor did not turn ON within the specified time.
FIP1.16
072-100 -
<IOT Tray2 Misfeed Jam>
After the Tray 2 Feed Clutch turned ON, the Regi.
Sensor did not turn ON within the specified time.
FIP1.17
075-100 -
<MSI Misfeed Jam>
After the MSI Feed Solenoid turned ON, the Regi.
Sensor did not turn ON within the specified time.
FIP1.18
077-101 -
<VSYNC ON Jam>
Detect VSYNC ON Jam.
Replace the
PWBA MCU.
(REP 18.2)
077-104 -
<Regi. Off Jam>
The Regi Sensor does not turn OFF within the
specified time after the Regi Clutch turned On.
FIP1.19
077-106 -
<Exit On Jam>
The Exit Sensor does not turn ON within the speci-
fied time after the Regi Clutch turned On.
FIP1.11
077-107 -
<Duplex Regi On Jam>
After the Invert Clutch turned ON, the Regi. Sensor
did not turn ON within the specified time.
FIP1.12
Status
Code
LCD Message Name/Description of Error FIP
To Next Page
Loading...
